New Items

Product Details:

We are manufacturer of Stop Check Valves.

• Introduction:- Refrigerants
• Standard version:- -46/ + 150 C

Product Details:

Main Features:

• Cooling output & time based Defrost
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error
• Buzzer output

Additional Information:

• Item Code: SZ-7514P

Product Details:

Main Features:

• Cooling output & Time based Defrost
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error

Additional Information:

• Item Code: SZ-7526-P

Product Details:

Main Features:

• Switch off compressor on the difference between control & reference temp
• Provision to switch off compressor on Low Temperature (LT)

General Specifications:

• 230VAC Standard. Other models with 12 VDC, 24 VDC, 110 VAC on request

Additional Information:

• Item Code: SZ-7552P-7562P

Product Details:

Main Features:

• Individual set points, differentials and time delays
• Cycling of compressors to avoid overloading one compressor
• Activate second compressor in case first compressor is not able to handle the load
• An internal 10 sec time delay is provided to avoid simultaneous startups of compressors & a similar option for switching off as well to prevent an electrical surge
• Software keypad lock to avoid parameter tampering by bystanders

Product Details:

We are a supplier of SZ-7031/21/81 Digital Temperature Controllers in india. Simple digital temperature and process indicator comes with ABS plastic with polycarbonate graphics are used. Design Digital and Analog circuit based Temperature Sensor Input Thermocouple type J, K, or RTD (Pt-100)/2 or 3 wire (any one to be specified)Temperature Range0 to 400oC for J,K or (Pt-100) 0 to 1000oC for K type 0.0 to 199.9oC /-100.0 to 199.9oC for (Pt-100) (User to specify required range)Process Input(4-20)mA, (0-1)V, (0-5)V, (0-10)V Process Range0 to 1999 or -1999 to 1999 or 0 to 19999 or -19999 to 199999 with choice of Decimal point (User to specify required range)Indicating Accuracy /-0.5% of the specified range for temperature input and Absolute to the process input Display Size3 and ½ digit or 4 digit or 4 and ½ digit 0.3”, 0.5”, 1.0”, 2.0” and 4.0” red/green seven segment LED.Control Set Points One or Two settable using potentiometer or thumb wheel switches.Control Action On/Off, Time Proportional or Analogue Proportional Hysterisis, Band and Reset Control Adjustable using front panel potentiometers (settings are model dependent).Control Output a) Relay changeover contacts(6A@230VAC) – preferred for ON/OFF control only (To drive external power contactors) b) Solid state relay driver (0 to 10) VDC pulse – preferred for Time Proportional control. c) Built in Solid-state relay or Triac (rated for 10A @ 230VAC) – preferred for Time Proportional control. d) Analog or triggering pulses for Triac for phase angle control {single phase} – preferred for proportional control. Enclosure ABS Plastic for 1/8 din, ¼ din and Metal for others Front Fascia ABS plastic with polycarbonate graphics.

Applications:

• Furnace / Oven control
• Constant temp. Baths
• Plastic / Packaging / Pharma industry
• Cold Storage and Chilling plants
• Laboratory equipment etc.

Product Details:

Main Features:

• Cooling output
• Digital input for Door Switch
• Relay output: Heater & Compressor
• Auto / Manual defrosting facility (Time/ Temp based)

Input & Output:

• Relay Output 1: 8(3) A Compressor
• Relay Output 2: 5 A Heater
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil)

Additional Information:

• Item Code: SZ-7514-P

Product Details:

Owing to our expertise in this field, our firm is engaged in supplying an extensive array of Gas Can.
r 134 a cfm 22
r 404a
r 407c
r 32
r 508 b
sf 6
1234 yf
R 141 b
507

Product Details:

We manufacture,supply and export the check valve type CNRVA can be used in liquid,sucstion and hot gas lines in refrigeration and air conditioning plant with ammonia. CNRVA can also be used in refrigerating systems with flurinated refrigerants.

Features:

• Valve housing made of special
• Cold resistant steel
• Ensures correct direction of flow
• Available for 40 bar(580psig) working pressure

Product Details:

Manufacturer Of Subzero Temperature Controllers & Indiactors in India from New Mumbai.

Main Features:

• Cooling & Heating output
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error
• Power switch

Product Details:

Main Features:

• Switch off compressor at setpoint.
• Manual / Auto restart options.
• Alarm output for high / low temperature.

General Specifications:

• Other models with 12 VDC, 24 VDC, 110 VAC on request
• Spade terminals for compressor

Additional Information:

• Item Code: SZ7558P

Product Details:

We are Manufacturer & Supplier of SZ-7510P / SZ- 7569P Subzero Temperature Controllers in India.

Main Features:

• Temperature Controller With Power Switchs
• Cooling & Heating output
• Memory retention, time delay for compressor protection
• Auto operation incase of sensor error
• Power switch

General Specification:

• Other models with 12 VDC, 24 VDC, 110 VAC on request
• Spade terminals for compressors (For SZ-7569-P only)

Product Details:

Main Features:

• It controls Compressor, Condenser and Blower
• Buzzer for fault indication.
• HP / LP, OL, SPP trip protection for compressor
• Overload protection for condenser & blower

Inputs:

• Compressor 1&2 OL
• Condenser1&2 OL
• Blower OL, HP / LP 1&2, CCH 1 & 2

Outputs:

• 8(3) A for Compressor1 & 2
• Condenser1&2, Blower

Product Details:

Inputs:

• Compressor OL,
• Condenser1&2 OL,
• Blower OL, HP/LP, CCH

Output:

• 8(3) A for Compressor
• Condenser1&2, Blower

Main Features:

• It controls Compressor, Condenser and Blower
• Buzzer for fault indication
• HP / LP,OL,SPP trip protection for compressor
• Overload protection for condenser & blower

Product Details:

Being the leaders in the industry, we present Castle Overflow Valve to our wide client base.

Product Details:

Features:

• Innovation is our forte and we strive to design and develop a precision engineered range of highly efficient Cold Room Controllers.
• This CRC-1100 is a panel mounted controller and is efficient in controlling the cold room temperature. There is a controller present in these freezers, which effectively controls the defrost.
• It does so either with the aid of an electrical heater where the compressor is stopped or at cycle inversion using warm gas where the compressor keeps on working.
• Intervals between defrosts and the maximum time out after which the defrost needs to be interrupted can be decided by the user.
• Evaporator fans present in the freezer are controlled by the same probe which controls the defrost cycle.

 

Other Details:

• Possible to set the temperature
• Delay time after a defrost can also be set
• User can also decide the relation of fans with the compressor

 

Main Features:

• LCD with back lighting to display all parameters
• 2 NTC probes for cold room temp + evap. coil temperature
• Relay outputs: Compressor + Cond. Fan + Heater + Evap. Fan + Alarm
• Audible alarm.
• Digital inputs: 2 nos. (a) Door switch (b) Pressure cutout
• HP / LP / OSS trip protection for compressor.
• Compressor protection algorithm
• Auto/Manual defrosting facility (Time/Temp based)
• Special software to indicate probable heater fault

Input & Output:

• Output 2: 8(2)A Heater
• Output 3: 8(2)A Evaporator Fan
• Output 4: 8(3)A Condenser Fan
• Output 5: 5 A Alarm

Product Details:

We are a Manufacturer & supplier of Defrost Controller in india.

Additional Information:

• Item Code: SZ-7525P

Product Details:

We are a leading name, which is engaged in delivering Defrost /Air Dryer Controller to respectable clients. The offered range of defrost /air dryer controllers is designed & developed utilizing high grade raw material and innovative techniques in complete adherence with the industry laid norms and standards. Moreover, the offered range of defrost / air dryer controllers is suitably checked on different characteristics to ensure its compliance with the industry laid norms and standards.

Main Features:

• Cooling output & Time based Defrost.
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error

Input & Output:

• Relay output: 8(3) A
• Temp. Sensor Input: 1 NTC

Additional Information:

• Item Code: SZ-7520-P

Product Details:

It is extremely well suited for medium installations up to 36 or 100devices, such as petrol stations, supermarkets or storage centers. Its innovative and useful features make the instrument suitable for medium - large applications such as production and storage goods centers. Thanks to its two available formats, it can be installed whether on DIN Rail or wall or panel mounting, but can also be used as desk instrument. Local or remote connection from aPC is made without the need of special software, only a standard web browser (Microsoft Internet Explorer or Firefox ) software is needed; the information is displayed as Web pages.

Details:

• Data capture and alarm monitoring WEB server connectable to Dixell’s controllers with serial output or to others Mod BUS-RTU compatible devices
• Ability to operate in stand alone mode thanks to the local display and keyboard (XWEB500)
• Easy DIN Rail mounting (DIN) directly inside the machine board or wall mounting with brackets (XWEB500D)
• Quick and easy connection to Web pages with dedicated interface for PDA/Smartphone
• Possibility to see and modify the parameters of the connected devices remotely
• Complete and simplified analysis of the unit functioning thanks to a powerful tool that allows to view data in graphical format (Excel®)
• One year of stored data inside the XWEB memory (one year of storeddatawith15min sampling time for 36or 100 controllers)
• XWEB500D is always accessible even with isolated installations using the built-in GPRS connectivity (optional)
• Layout for net surfing of web site in graphic format
• Data export on USB pen drive
• Performance Meter for cooling dem and control
• Alarm sending via FAX, SMSor e-mail
• 15VAmax power absorption

Product Details:

Main Features:

• Digital input for Pressure Cutout
• Relay output: Compressor + Heater + Evap. Fan
• HP / LP / OSS trip protection for compressor
• Compressor protection algorithm
• Auto/Man defrosting facility (Time / Temp based)

Input & Output:

• Relay Output 1 & 2: 8(3) A for Heater & Evap. Fan
• Relay Output 3: 20A Compressor
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil).

Additional Information:

• Item Code: SZ-7522P

Product Details:

We are Manufacturer & Supplier of Refrigeration Controllers in india from New Mumbai.

Additional Information:

• Item Code: SZ-7515P

Product Details:

We are a supplier of SZ 7524P / SZ 7527 Freezer Controllers in india.

Product Details:

Manufacturer & Supplier for Subzero AC Controllers.

Main Features:

• It controls Compressor, Condenser and Blower
• Buzzer for fault indication.
• HP / LP, OL, SPP trip protection for compressor.
• Overload protection for condenser & blower

Inputs:

• Compressor 1,2&3 OL
• Condenser1,2&3 OL
• Blower OL, HP/LP 1,2&3

Outputs:

• 8(3)A for Compressor1,2 &3
• Condenser1,2&3 Blower

Product Details:

Pioneer Manufacturer of Temperature Indicator in India from New Mumbai.

Additional Information:

• Item Code: SZ-7505P

Product Details:

We are Pioneer Manufacturer of Temperature Indicator in India from New Mumbai.

Additional Information:

• Item Code: T-2C

Product Details:

Main Features:

• Cooling & Heating output
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error
• Power switch

General Specifications:

• 230 VAC Standard. Other models with 12 VDC, 24 VDC, 110 VAC on request
• PC Communication (RS 485)

Additional Information:

• Item Code: SZ-7510-C

Product Details:

We Manufacturer of Twin AC Controller from India in New Mumbai.

• This is a two-compressor controller with an inbuilt Free Cooling Capability.
• It is specifically designed to maintain the Shelter temperature at a desired level with the help of Compressors or by using Free cooling concept at low ambient to save energy.

Product Details:

Product Details:

Product Details:

Product Details:

This is a two-compressor controller with an inbuilt Free Cooling Capability. It is specifically designed to maintain the Shelter temperature at a desired level with the help of Compressors or by using Free cooling concept at low ambient to save energy.

Features:

• Free Cooling concept: In case of low ambient conditions controller will switch off the compressors and use outside ambient air with the help of dampers to maintain shelter Temperature.
• Separate setting for individual cooling units.
• In case one compressor is not capable of handling the I.d the compressor will activate and both compressors will cutout at the lowest set point in Compressor and Dual cooling mode.

Product Details:

Main Features:

• 48 VDC operated. Dual AC controller with free & emergency cooling
• AC fail alarm. Compressor fault sensing. (HP, LP)
• Over Current & Undercurrent sensing for compressor
• Internal swapping to maintain equal run-hours
• RS485 / RS232 connectivity (optional)

Input & Output:

• 2 NTC for Ambient and Shelter temperature, 1 Humidity sensor
• Digital Inputs: HP, LP, UL, OL, MCB1, MCB2, DC fan fault sensing
• Digital output: DC Fan 1, DC Fan 2, Compressor 1, Compressor 2, Damper 1, Damper 2, Ac 1 fail alarm, Ac 2 fail alarm, HT alarm

Product Details:

Being a customer centric organization, we have emerged as one of the reputed names in the industry in offering ATM Temperature Controller.

Features:

• Corrosion resistance
• Durability
• Excellent performance

Product Details:

The extensive assortment of Aluminum Impeller Riveted (DIDW) provided by our organization is widely accepted by our prestigious clients. These are manufactured and designed in accordance with the established norms & standards of the industry.

Apart form this, our engineers make use of premium grade raw material and sophisticated technology in fabricating these. Adding to that, we offer these in customized designs as per the clients'' requirements.

Product Details:

Our company is a major name, which is involved in providing Aluminum Impeller Rolled. The provided variety is produced from quality approved material in sync with the set industry parameter of quality.

These are highly reliable, efficient and highly durable. In addition to this, the provided variety is offered at industry leading price to our customers.

Product Details:

We are offering a huge array of Fan Blade (With Ring) to our valued customers. These are offered in various specification to meet the variegated demand of the customers.

The are very sturdy in construction and highly appreciated for its high durability and strength. These are offered to the customers at industry leading price.

Product Details:

Due to top quality targeted approach, we have developed market in the industry by providing an tremendous quality range of Aluminum Impeller Rolled (DIDW), which find their application in several areas.

These are produced using the the finest quality of material with most innovative technology, these are greatly regarded of its excellent quality and strength. Focusing on the different need of our clients, we provide these are offered in various sizes and requirements.

Product Details:

We are one of the renowned manufacturers engaged in providing qualitative range of Angle Valves (Receiver Valves) to our esteemed patrons. These receiver valves can be installed on commercial refrigerating systems, civil & industrial air-conditioning systems and are suitable for all refrigerant fluids except Ammonia. Further, these are manufactured in adherence with industry's laid norms and guidelines.

Construction:

• Hot forged brass as per BS - 218
• Steel with proper surface protection, for the spindle
• Neoprene rubber for the gland
• Engineering Plastics for the cap that covers the spindle.

Features:

• Refrigeration Line Valves
• Copper Line Valves
• Freon Gas Valves
• Refrigeration Gas Angle Valves

Product Details:

Main Features:

• Switch off compressor at set point.
• Manual reset is required to re-start.
• Buzzer output on achieving antifreeze set point.

Additional Information:

• Item Code: SZ-7512P

Product Details:

Features:

• New Fixed Hook
• Tube Benders Bend Soft Copper, Brass, & Aluminium Tubing Only
• 90deg Start Provides maximum leverage for easy bending

Size:

• 6.35mm(1/4")

• 7.94 mm(5/16")
• 9.S2 mm(3/8")
• 12.70n1m(1/2")
• 15.88mm(5/8')
• 19.05mm(3/4")
• 22.22mm(7/8")
• 25.40mm(1")
• 28.58mm(1.1/8")

Product Details:

Product Details:

Product Details:

Manufacturer & Supplier for Brass Angle Valves for Freon Refrigerant Gas applications

Brass Angle Valves/ Refrigeration Valves:

• Castle are one of the renowned manufacturers engaged in providing qualitative range of Angle Valves (Receiver Valves) to our esteemed patrons. These receiver valves can be installed on commercial refrigerating systems, civil & industrial air-conditioning systems and are suitable for all refrigerant fluids except Ammonia. Further, these are manufactured in adherence with industry's laid norms and guidelines.

Construction:

• Hot forged brass as per BS - 218
• Steel with proper surface protection, for the spindle
• Neoprene rubber for the gland
• Engineering Plastics for the cap that covers the spindle

Feature:

• Can be used on all CFC's and HCFC's
• Seat of Engineering plastic to give complete shut off with minimum torque
• Fitted with stainless steel diaphragms that prevent leakage
• Throughout the operating life of the valve

Additional Information:

• Item Code: CAV-76

Product Details:

We are Manufacturer & Supplier of check valve /Non regulating valve for freon Applications Inline Check Valves for Refrigeration.
.
Application:

• These check valves are designed for installation in liquid, suction and hotgas lines on commercial refrigerating systems and on civil and industrial air-conditioning systems.

Construction:

• The main parts of the valves are made with the following materials extruded brass as per BS-218 stainless steel for the spring neoprene rubber for outer seal PTFE for seat

Installation:

• The valves can be installed in any section of a refrigerating system, where it is necessary to avoid an inversion of the refrigerating flow.
• Before connecting the valve to the pipe it is to make sure that the refrigerating system is clean. Infact the valves with PTFE seats are particularly sensitive to dirt and debris. Furthermore check that the flow direction in the pipe corresponds to the arrow stamped on the body of the valve.

Product Details:

The Subzero “NC 1000” are electrical control panel that integrate all the basic control functions required by a chiller. A user friendly LCD screen displays all parameters, status and alarm messages. It is a wall mounted control control panel dedicate to control the chiller and its various devices. It has Compressor & Pump protection algorithm which include shutting down the system in case of various faults. It has emeregency stop switch which stop the entire system in case emergency condition.

Product Details:

The Subzero “NC 1000” are electrical control panel that integrate all the basic control functions required by a chiller.A user friendly LCD screen displays all parameters, status and alarm messages. It is a wall mounted control control panel dedicate to control the chiller and its various devices. It has Compressor & Pump protection algorithm which include shutting down the system incase of various faults. It has emeregency stop switch which stop the entire system incase emergency condition

Product Details:

The Subzero ‘Mega Chill’ is a controller that integrates all the control functions required by a chiller. It is a complete, independent, rugged and highly reliable unit. It is one of the most efficient chiller controller of it’s kind in the country with the kind of features it provides.

A user friendly LCD screen displays all parameters and message alarms on the display. In addition to the LCD there are LED’s provided for instant status of all controls in the system. The Mega Chill controller allows you to manage refrigeration units having different configurations.

Product Details:

The Subzero “Neno Chill” are controllers that integrate all the basic control functions required by a chiller. A user friendly LCD screen displays all parameters, status and alarm messages. It is a panel mounted controller dedicated to control the chiller and its various devices. It has Compressor & Pump protection algorithm which include shutting down the system in case of various faults.

Product Details:

The Subzero ‘Micro Chill’ is a controller that integrates all the control functions required by a chiller. It is a complete, independent, rugged and highly reliable unit. It is one of the most efficient chiller controller of it’s kind in the country with the kind of features it provides. A user friendly LCD screen displays all parameters and message alarms on the display. In addition to the LCD there are LED’s provided for instant status of all controls in the system. The Micro chill controller allows you to manage refrigeration units having different configurations.

Product Details:

We are manufacturer of cold storage plant. Contact us for a full range of cold storage plant which is chosen by clients from across the country for their sturdy construction and high quality. These cold storage are manufactured with the use of superior quality components.

Product Details:

We are able to offer Cold Room/Storages Door hinges CS-1470 to valued clients. The offered range of Cold Room/Storages door hinges CS-1470 is manufactured utilizing high grade raw material and innovative technology in strict conformation with the highest quality norms and standards. Moreover, the offered range of Cold Room/Storages door hinges CS-1470 is suitably inspected on different parameters to maintain its authenticity throughout the designing process.

Features:

• Dimensionally accurate
• Durable finish standards
• Rust proof nature

 

Additional Information:

• Item Code: CS1470-CS1450

Product Details:

We have gained immense expertise in offering Cold Room / Storages Cold Room & Storages Door Latch's at customers' premises. The offered range of door latch Cold Room & Storages Door Latch's is developed utilizing high grade raw material, which is sourced from trustworthy vendors of the market. In addition to this, the offered range of Cold Room / Storages door latch CS – 1178 L is tested on different characteristics to ensure that flawless products are delivered at clients' base.

Features:

• Smooth finish
• Durable
• Corrosion resistant

Product Details:

Other Details:

• The CRC - 1200 is a panel/wall mounted controller dedicated to controlling the cold room and its various devices.
• The controller controls the defrost in the system based on either an electrical heater where the compressor is stopped, or at cycle inversion using warm gas where the compressors keeps on working.
• It is also possible to select the interval between defrosts and a maximum time out after which the defrost is interrupted.
• The same probe which controls the defrost cycle is also used to control the evaporator fans.
• Post drip and condenser fan control are amongst many other features in this controller.

Additional Information:

• Item Code: CRC-1200

Product Details:

We are Manufacturer & Supplier's of best quality of Cold Room Door Accessories. We also Manufacture the Latches with Powder Coating preferred by the customer instead of Chorme Plating. The option of Master Key are also Available, on Special request by Customer.

Features:

• The Product range includes Lock/Latch & Hinges for Cold Room Puff Doors
• Thus the Models we Manufactures are.
• Castle Cold Room Door Latch:- CS-1178L
• Castle Cold Room Door Latch:- CS-1178P
• Castle Cold Room Door Hinge:- CS-1470
• Castle Cold Room Door Hinge:- CS-1450

Additional Information:

• Item Code: CS-1178L

Product Details:

Being a customer centric organization, we have emerged as one of the reputed names in the industry in offering Dairy Equipment Controller.

Features:

• Corrosion resistance
• Durability
• Excellent performance

Product Details:

Main Features:

• Switch off two AC at set point
• AC fail alarm. Voltage Sensing. Digital Inputs
• Auto / Manual switch
• Internal swapping for maintain equal run-hours
• RS 485 Connectivity (optional)

Input & Output:

• NTC Sensor
• Digital Inputs: HP, LP, UL OL, UV, OV
• Digital output: Compressor 1, Compressor 2, Alarm 1, Alarm 2, HT alarm

Product Details:

We are indulged in offering Fan Blade in various sizes to meet with the various demand of our customers. High value quality audit under our the supervision of quality controller help to make these highly durable.

The are made keeping in mind the set industry parameter of quality standards we assured that customer can get 100% satisfaction and quality performance form these. These are offered at market competitive price to our customers.

Product Details:

We provide very high quality of Fan Blades that are designed using best qualities of raw material which is in accordance to the worldwide standards of quality. The most beneficial features of the provided products are great tensile strength, deterioration level of resistance, robust construction, longer service life and great durability. Moreover, these can be acquired at industry leading price.

Product Details:

Input & Output:

• 2 NTC for Ambient and Shelter temperature
• Relay output: 8(3) A / 20Amp (Optional)
• Humidity (optional)
• Digital Input: COMP ON-Feedback,compressor fail alarm
• Output: DC Fan, Compressor interlock, Alarm output, Contact for Data Logger

Main Features:

• For independent free cooling units.
• 48 VDC operated.
• Free / Emergency cooling.

Product Details:

Main Features:

• Relay output: Compressor + Heater + Evap. Fan
• Compressor protection algorithm
• Auto/Man defrosting facility (Time/ Temp based)

Input & Output:

• Relay Output 1 & 2: 8(3) A for Heater & Evap. Fan
• Relay Output 3: 8(3) A
• 2 NTC (Room & Evap. Coil)

Additional Information:

• Item Code: SZ-7524-P

Product Details:

Main Features:

• Cooling output
• Digital input for Door Switch
• Relay output: Heater & Compressor
• Auto / Manual defrosting facility (Time/ Temp based)

Input & Output:

• Relay Output 1: 8(3) A Compressor
• Relay Output 2: 5 A Heater
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil)

Additional Information:

• Item Code: SZ-7527P

Product Details:

Main Features:

• Digital input for Pressure Cutout
• Relay output: Compressor + Heater + Evap. Fan
• HP / LP / OSS trip protection for compressor
• Compressor protection algorithm
• Auto/Man defrosting facility (Time / Temp based)

Input & Output:

• Relay Output 1 & 2: 8(3) A for Heater & Evap. Fan
• Relay Output 3: 20A Compressor
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil).

Additional Information:

• Item Code: SZ-7534P

Product Details:

Main Features:

• 7 Segment LED display & LCD with backlight to display all parameters and control status
• In the absence of a CO₂ sensor, Unit will work on an ON / OFF logic provided 2 for Damper / Fan operation to vent CO₂
• Automatic control of Ethylene by operation of a Solenoid valve
• In the absence of an ethylene sensor, unit will work on an On / Off logic provided for ethylene solenoid valve
• Real time clock in case of power failure to keep in memory number of hours operated
• One push button activation for complete operation of ripening process

Product Details:

Main Features:

• Can be used on all CFC’s and HCFC’s. (Freon Gases)
• Seat of Engineering Plastics to give complete shut off with minimum torque.
• Fitted with stainless steel diaphragms that prevent leakage.
• Throughout the operating life of the valve.

Application:

• These diaphragm type hand shut off valves are designed for installation in liquid, suction and hotgas lines of commercial refrigerating systems and on civil and industrial air-conditioning systems.

Construction:

• Diaphragm valves don't have gland seals. The external sealing is assured by thin metal discs (diaphragms), which hermetically divide the spindle chamber from the fluid flow area.

The main parts of the valves are made with the following materials:

• Hot forged brass body as per BS-218
• Extruded brass for the spindle
• Special spring steel for the spring Engineering
• plastic for seat sealing gaskets

Product Details:

• Brass Valves with M 14*1.5 , M16 * 1.5, ....
• Control knob for Flame adjustment
• Wide Duplex - Nickel plated wind proof Burners.
• Optional Brass Burners

Product Details:

Product Details

Product Details:

Product Details:

Product Details:

Other Details:

• 7 Segment LED display & LCD with backlight to display all parameters and control status
• In the absence of a CO2 sensor, Unit will work on an ON/OFF logic provided 2 for Damper/Fan operation to vent CO2.
• Automatic control of Ethylene by operation of a Solenoid valve.
• In the absence of an ethylene sensor, unit will work on an On/Off logic provided for ethylene solenoid valve.
• Real time clock incase of power failure to keep in memory number of hours operated.
• One push button activation for complete operation of ripening process.

Product Details:

Key Features:

• Ip24 - Splash Proof
• Easy Access Tank
• Built In Spirit Level
• Plug & Play

Suitability:

• Up To 733Kw / 2.5M Btu/H
• Ducted Units; Floor Standing & Chassis Units; Cassette Units

Product Details:

Key Features:

• Ultra Slim
• High Performance
• Plug & Play
• Anti Siphon Device

Suitability:

• Up To 16Kw / 54,000Btu/H
• High Wall Mini Split Systems; Ducted Units; Floor Standing & Chassis Units
• Perfect For Installing Directly Inside The Unit

Product Details:

Application:

• The advantages of the oil separator on the discharge line of a compressor in arefrigeration system are confirmed by many years of experience. The oil separator intercepts the oil mixed with compressed gas and returns it to the crankcase of the compressor thus assuring an efficient lubrication of its moving parts. Furthermore, the oil separator maintains a high coefficient of condenser and evaporator performance by almost completely removing oil deposits from their exchange surfaces. When a very high temperature at the end of the compression stage lead to the formation of oil vapours. Moreover, the oil separator, damping the valves pulsations, reduces system noise with an open or semi-hermetic compressor. Finally, the use of an oil separator leads to a longer life of the compressor; a better performance of the whole system with consequent energy saving; A quieter operation by reducing pulsations.

Installation:

• The oil separators should be installed in the discharge line between the compressor and the condenser mounted securely in a vertical position and reasonably close to the compressor.
• To prevent the return of refrigerant from condenser, during the off cycle of the system, it's advisable to install a check valve between the condenser and oil separator outlet.

Features:

• Oil Seperator in Refrigeration Line.
• Freon Line Oil Seperator.
• Refregeration Line Oil Seperators.

Product Details:

Core shell with replaceable solid core is used in Liquid and / or Suction lines in large refrigeration and air-conditioning systems. These are specifically designed to provide flexibility over a wide range of applications. A wide range of fittings for suction line applications and interchangeable lay-in dimensions with other manufacturer model increases product versatility for use of 48 cubic inch core, which helps in removal of moisture, acids, waste and oil. Option of single/two and three cores available in varieties of model A new design of internal assembly provides the advantage of using Dry All 'DPE 48 BD' and 'DSS 48' filter element, which removes solid contamination such as copper oxides, chips and other metal particles during flushing and continuous running application in both directions.

Features and Specifications:

• Housing is made of sturdy steel for longer life.
• Shell compatible with all refrigerants.
• Solid copper end connection with full flow fitting for low pressure drop
• All welded construction with unique hardware for hassle free installation
• Core holders are designed to ensure automatic and immediate centering of the filter shells.
• Each housing and core holder is treated against corrosion in a unique pretreatment process.
• External corrosion resistant epoxy powder paint finish surpassing 1000 hours ASTM Salt spray test for corrosion.
• No-Flow area restricted outside the filter shells because of appropriate filtering system.
• 100% leak tested before and after powder coating.
• Shells and gasket are compatible with HFC and HCFC as well as with their associated oils and additives.

Product Details:

Manufacturer & Supplier of SZ-7510E / SZ- 7569E Subzero Temperature Controllers in India. We have established ourselves as a renowned manufacturer and supplier in offering an attractive range of Controller With 10 / 20A Relay / SZ-7510E / 7569E. These products are stringently tested on various parameters by our quality controllers to ensure its flawlessness. Further, these products are highly appreciated in the market for its features like longer service life, accurate results, dimensional accuracy and high performance.

Main Features:

• Cooling output
• Memory retention, time delay for compressor protection
• Auto operation incase of sensor error

General Specifications:

• Panel cutout: 29 X 71 mm Screw terminals : Admit 1 X 2.5 mm² wire
• Spade terminals for compressors (For SZ-7569-E only)

Product Details:

Pioneer Manufacturer of Temperature Indicator in India from New Mumbai.

Additional Information:

• Item Code: T-72

Product Details:

Pioneer Manufacturer of Temperature Indicator in India from New Mumbai.

Additional Information:

• Item Code: T-4R

Product Details:

One of the most critical areas of air to air and air to water heat pump application is the proper control of liquid refrigerant under low ambient heating conditions. System design must maintain a delicate balance between sufficient flooding to adequately cool the compressor, while avoiding excessive flooding which would adversely affect lubrication. When coil defrost is required, the compressor is exposed to sudden surges of liquid refrigerant and oil that can create extreme stresses in the compressor. Both laboratory testing and field experience indicate that a properly designed suction accumulator can provide excellent protection against both potential hazards.

Product Details:

Product Details:

Product Details:

Main Features:

• Relay output Compressor + Heater + Evap. Fan
• Compressor protection algorithm.
• Auto/ Man defrosting facility (Time/ Temp Based).

Input & Output:

• Relay output 1 & 2: 8(3) A for Heater & Evap. Fan.
• Relay output 3: 8(3) A Compressor.
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil).

General Specifications:

• 230 VAC Standard. Other models with 12 VDC, 24 VDC, 110 VAC on request.
• Panel cutout: 29 X 71 mm Screw terminals : Admit 1 X 2.5 mm² wire.

Additional Information:

• Item Code: SZ-7524-C

Product Details:

We are Manufacturer & Supplier of SZ-7510P / SZ- 7569P Subzero Temperature Controllers in India.

Main Features:

• Cooling & Heating output
• Memory retention, time delay for compressor protection
• Auto operation incase of sensor error
• Power switch

Input & Output:

• Relay Output: SZ-7510 P - 8(3)A / SZ-7569P - 20A (Inductive).
• Temp. Sensor Input: NTC.

General Specification:

• Panel cutout: 29 X 71 mm Screw terminals: Admit 1 X 2.5 mm² wire
• Spade terminals for compressors (For SZ-7569-P only)

Product Details:

Product Details:

Product Details:

We are the manufacturer of 407 c refrigerant gas.

Cylinder Material: stainless steel
Packaging Size: 45

Product Details:

With the rich experience in this industry we are able to provide a huge array of Aluminum Impeller to our prestigious customer. These are produced at our manufacturing facility under the strict supervision of expert professional who only use the quality approved material so as these can provide efficient performance for a longer period of time. These are offered to the customer at industry leading price.

Product Details:

• DIA. - 60mmx180mmx4mm(pin)
• DIA. - 60mmx240mmx4mm(pin)
• DIA. - 60mmx300mmx4mm(pin)

Product Details:

We are indulged in offering a high quality range Durable Aluminum Fan Blade. We also customize these as per the customer's specifications and are also offered in standard designs and sizes.

These are accurately designed and fabricated to fulfill the worldwide quality and construction standards. These are offered to the customer at industry leading price.

Product Details:

With a wealth of intellectual capital and state of art manufacturing facilities we bring forth a vast range of Aluminum Impeller Riveted. These Aluminum Impeller Riveted are high on reliability, responsiveness and performance.

Due to our quality we are trusted and respected by our clients. Moreover, we provide these range of product at market best price.

Product Details:

In order to meet the customer's requirements we are indulged in offering a wide range of Aluminum Fan Blades. These fans blades offered by us are known and appreciated by the clients for their strong construction, durability and high performance.

These are widely demanded for its excellent quality in the marketplace. These can be availed at market leading price from us.

The Subzero “NC 1000” are electrical control panel that integrate all the basic control functions required by a chiller. A user friendly LCD screen displays all parameters, status and alarm messages. It is a wall mounted control control panel dedicate to control the chiller and its various devices. It has Compressor & Pump protection algorithm which include shutting down the system incase of various faults. It has emeregency stop switch which stop the entire system incase emergency condition

Product Details:

Product Details:

Product Details:

We provide very high quality of Fan Blades that are designed using best qualities of raw material which is in accordance to the worldwide standards of quality. The most beneficial features of the provided products are great tensile strength, deterioration level of resistance, robust construction, longer service life and great durability. Moreover, these can be acquired at industry leading price.

Product Details:

Flexible Magnet  (Refrigerator Door Gaskets)

We manufacture Flexible magnets which permit design innovations which are not possible when using rigid/brittle magnets. These can be bent or twisted in almost any shape without any loss of magnetic energy. These find application in refrigerator gaskets, toys, cupboards etc.

 

Features:

• Plastic-bonded flexible permanent magnets
• Manufacturing process: Extruding, Calendering
• Optional as magnetic strips, profiles or sheets
• Materials used: Barium and Strontium Ferrite (hard ferrites) with high quality flexible plastics

Product Details:

Main Features:

• Relay output: Compressor + Heater + Evap. Fan
• HP/LP/OSS trip protection for compressor
• 0.1 °C resolution
• Auto / Manual defrosting facility (Time/ Temp based)

Input & Output:

• Relay Output 1 & 2: 8(3)A for Heater & Evap. Fan
• Relay Output 3: 8(3) A Compressor
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil)

Product Details:

Main Features:

• Blue LCD with backlighting with 16 X 2 characters to display all parameters
• Relay outputs Compressor, Heater, Evap. Fan and Alarm
• HP / LP / OSS trip protection for Compressor
• Auto / Man defrosting facility (Time/ Temp Based)
• Special Software to indicate probable heater fault

Input & Output:

• Relay output: 8(3) A for Compressor
• Relay output: 8(3) A for Heater, Evap. Fan
• Alarm: 5 A
• Temp. Sensor Input: 2 NTC (Room & Evap. Coil)

Additional Information:

• Item Code: SZ-7524P

Product Details:

Main Features:

• Cooling output & Time based Defrost
• Memory retention, time delay for compressor protection
• Auto operation in case of sensor error
• Time based signal for auto drain valve
• Defrost time / Drain valve signal selectable in minutes & seconds

Input & Output

• Relay output : 8(3)A for cooling
• Relay output : 5 A for Heater, Hotgas and Auto Drain Valve
• Temp. Sensor Input : 1 NTC

General Specifications:

• Temperature range -50 °C to 99 °C
• 230 VAC Standard. Other models with 12 VDC, 24 VDC, 110 VAC on request
• Panel cutout : 29 X 71 mm. Screw terminals : Admit 1X 2.5 mm² wire

Product Details:

Application:

• These globe valves are designed for installation on commercial refrigerating systems on civil and industrial airconditioning
• systems. They are amongst many applications, used to isolate various devices like driers, receivers etc. They have large orifices to keep pressure drops to a minimum. These valves are suitable for all CFC’s and HCFC’s except Ammonia. They can be used to Isolate a drier or similar device.

Installation:

• The brazing of these valves with solder connections should be carried with care using a low melting point filler material.
• It is necessary to remove the bonnett assembly with spindle and cap prior to brazing the valve.
• Re-assemble the valve only once the valve has cooled completely and reached room temperature.

Features:

• Freon Line Globe Valve.
• Refrigeration Globe Valve.

Product Details:

Heat Exchanger Suction Line Accumulator model has been developed for use on low temperature system to sub cool liquid line which also features a boil out coil. This is meant solely to boil off excessive liquid refrigerant at the bottom of accumulator by passing the liquid line through the heat exchanger coil. This increases system efficiency while helping to raise the oil temperature to facilitate oil flow in the suction line for better flow, while the system is running.

Product Details:

Liquid Refrigerant Receiver has been developed by Dry All for following applications:

• A pressure vessel or a tank, sized to hold the whole liquid refrigerant charge of the system.
• Serves to accumulate the reserve liquid refrigerant.
• To ensure the availability of adequate stored refrigerant until the system needs it.
• To store the complete refrigerant charge when the repairs are to be made to the high side of the system i.e. to provide a storage for off peak operation and to permit pumping down of the system during maintenance.
• The liquid receiver also serves as a seal against the entrance of gaseous refrigerant into the liquid line.
• Liquid receiver ensures the compensation of refrigeration volume variations in refrigeration and air-conditioning installations. These volume variations are due to fluctuations generated by various operating temperature at various seasons and to the opening and closing sequences of the expansion valve which fills or not the evaporator with its refrigerant.

Product Details:

Backed with our extensive industry experience, we are in the position as an prestigious supplier of M.S. Impellers. The Super series of this product have been produced using the finest quality of material which make them highly durable and efficient in performance. Our assortment has obtained enormous admiration from clients for its high quality, consistency and efficiency.

Product Details:

We are a Manufacturer & Supplier of moisture liquid indicator. Refrigeration Line Moisture Indicator or Refrigeration Sight Glass.

Application:

• This Refrigeration Sight glasses-Moisture Liquid Indicators ensure failsafe inspection of the conditions of the refrigerant fluid in the system as regards tothe regular flow and moisture. Liquid indicators also ensure inspection of the regular flow of oil feed-back to the compressor sump.

Installation:

• Before start up the moisture indicator colour may show colour as per the wet colour. This may be due to exposure to air and humidity and moisture in the circuit.
• When the moisture of the refrigerant fluid is brought back to acceptable levels with the dehydrator, the indicator colour will show the appropriate colour corresponding to dry.

Construction:

• Castle Moisture indicators are manufactured with imported glass which has been directly fused onto the metal nut. This construction allows the total elimination of sealing gaskets between the glass disc and the metal structure with theconsequent elimination of possible refrigerants.

The materials used for the main parts are:

• BS-218 forged brass for the flare brass indicators
• Refrigeration grade copper tube for copper end indicators
• Neoprene rings for sealing

Product Details:

Dry All manufactures two types of Oil Separator.

• Vertical Sealed type i.e. hermetic welded which cannot be dismantled.
• Vertical Flanged type i.e. accessible bolted flange construction which can be overhauled for maintenance.

Product Details:

Dry All high pressure Oil Strainer removes contaminant & dirt from the refrigerant oil line by means of a 100 mesh filter screen.